Northern pike are aggressive, hard-hitting predators that will chase lures other fish ignore. They live in cool lakes, rivers and reservoirs across the northern United States and Canada, and they can be caught from shore, from a boat, and through the ice.
Pike aren’t hard to fool, but they are hard on tackle. Their mouths are full of sharp teeth that slice through regular fishing line, and big pike pull hard and like to bury themselves in weeds.
This guide covers the gear you need, the lures and baits that catch pike, where to find them through the year, and how to handle them safely.
Understanding Pike
Pike are ambush hunters. A pike hides in or along cover, usually weeds, and bursts out to grab fish swimming past. That tells you most of what you need to know:
- Pike relate to weeds. Weed beds, weed edges and weedy bays are the first places to look.
- Pike like cool water. Small pike tolerate warm shallows, but big pike move to cooler, deeper water in summer.
- Pike hunt by sight and vibration. Flashy, noisy and big lures trigger strikes.
- Pike are opportunistic. They eat perch, suckers, small panfish, other pike, frogs and almost anything else that fits in their mouth.
The Gear You Need
Rod and Reel
A 7-foot medium-heavy rod with a fast action handles most pike fishing. It can cast heavy lures, set hooks through a bony mouth, and steer fish away from weeds. Pair it with a spinning reel in the 3000–4000 size range or a baitcasting reel. If you’re mostly casting larger spoons, spinnerbaits and jerkbaits, a baitcasting reel gives you more control.
Line
Braided line in the 30–50 lb range is the most popular choice. It casts well, cuts through weeds, and has almost no stretch for solid hooksets. Monofilament in the 15–20 lb range also works, especially for beginners. Our comparison of braided vs fluorocarbon fishing line covers the trade-offs.
Always Use a Leader
This is the most important piece of pike gear. Without a leader, a pike’s teeth will cut your line, and you’ll lose both the fish and the lure, which can then stay hooked in the fish.
- Wire or titanium leaders: the most bite-proof. Titanium is more flexible and doesn’t kink as easily.
- Heavy fluorocarbon leaders (40–80 lb): less visible in clear water and still highly resistant to teeth, though they should be checked for nicks often.
A leader 12 to 18 inches long, with a quality snap and swivel, works for most lures.
Tools
Bring long-nose pliers (8 inches or longer), a jaw spreader, a hook cutter, a large rubber-mesh net, and fishing gloves. These make unhooking faster and safer for you and the fish.
The Best Lures for Pike
You don’t need dozens of lures. A handful of proven styles will catch pike in almost every situation.
Spoons
The classic pike lure. A wobbling metal spoon, such as the well-known red-and-white pattern, flashes and vibrates like an injured baitfish. Spoons cast far, work at any depth, and are easy to fish: cast, let it sink to the depth you want, and reel steadily.
Inline Spinners
Large inline spinners with a big blade create flash and vibration that pike can feel. They’re great for covering water along weed edges and in shallow bays. Reel just fast enough to keep the blade spinning.
Spinnerbaits
Spinnerbaits are fairly weedless, so you can run them over and through weed beds where other lures snag. A spinnerbait with a large willow or Colorado blade is an excellent search lure in spring and summer.
Jerkbaits
Minnow-shaped jerkbaits that you twitch and pause imitate a struggling baitfish. They’re especially good in cold water in spring and fall, when pike are less willing to chase a fast lure. Most strikes come during the pause.
Soft Plastic Swimbaits
Paddle-tail swimbaits on a jig head or weighted hook have a natural swimming action and work at any depth. They’re very effective on pickier fish.
Topwater Lures
Few things in fishing beat a pike blowing up on a topwater lure. Buzzbaits, walking baits and hollow-body frogs work well over shallow weeds in summer, especially early and late in the day.
Color tips: in clear water, natural baitfish colors like perch, silver and gold work well. In stained water, try bright colors such as chartreuse, orange, red and white, or fire tiger patterns.
Live and Dead Bait
Bait fishing is a reliable way to catch big pike, especially in cold water.
- Live bait: large minnows or suckers fished under a float near weed edges.
- Dead bait: smelt, herring and other oily fish laid on the bottom. Pike are scavengers too, and dead bait is especially good right after ice-out and through the ice.
When fishing bait, set the hook quickly. A quick-strike rig with two treble hooks helps hook pike before they swallow the bait, which matters if you plan to release them. Rules on live bait use and transport vary by state, so check before you go.
Where to Find Pike Through the Year
Spring
Pike spawn very early, often right after ice-out, in shallow, marshy bays and flooded vegetation when the water is still cold (roughly the 40s). After spawning, they stay in these shallow areas to feed and recover. Shallow bays on the north side of a lake, which get more sun and warm first, are often the best early-season spots.
Many states have special rules or closed seasons for pike in spring to protect spawning fish, so check your local regulations.
Summer
Smaller pike often stay in shallow weeds all summer. Bigger pike move to cooler water: deep weed edges, points, rock humps and areas near springs or inflowing creeks. Fish the outside edge of the weed line, where the weeds stop and deeper water begins. Early morning and evening are usually best on hot days.
Fall
Fall is one of the best times to catch a big pike. As the water cools, pike feed heavily and return to weed edges and shallower areas. Focus on the remaining green weeds, because they hold baitfish. Bigger lures and slower retrieves often work well.
Winter
Pike stay active under the ice and are one of the most popular ice fishing targets. Tip-ups with live or dead bait set over weed edges and drop-offs are the classic method, and jigging spoons work too. See our Ice Fishing hub for gear and techniques.
Retrieves That Trigger Strikes
Pike often follow a lure without hitting it. These tips help turn followers into strikes:
- Vary your retrieve. Speed up, slow down, pause and twitch. Changes in speed often trigger an attack.
- Bump weeds and cover. A lure that rips free from a weed often draws a strike.
- Fish the edges. Cast parallel to weed lines so your lure stays in the strike zone longer.
- Do a figure-eight at the boat. If a pike follows to the boat, keep the lure moving in a wide figure-eight next to the boat instead of lifting it out of the water.
- Go bigger. When small lures aren’t working, a larger lure can bring out bigger pike.
How to Land and Unhook a Pike Safely
Pike are slimy, strong and have a mouth full of teeth, so plan ahead:
- Use a large net with rubber or coated mesh. It’s gentler on the fish and hooks don’t tangle in it.
- Keep the fish in the water while you get your tools ready, if possible.
- Control the fish by sliding your fingers carefully under the gill plate along the jaw, staying away from the red gill rakers, or by holding it gently behind the head. Wear gloves if you’re unsure.
- Use long pliers and a jaw spreader to remove the hook. If a hook is deep, cutting it is often better for the fish than pulling it.
- Support the body if you lift the fish for a photo, with one hand under the belly. Never hold a big pike vertically by the jaw alone.
- Release it quickly and hold it upright in the water until it swims off on its own.
Pike are good to eat, especially smaller fish from cold water, but they have a row of Y-shaped bones that takes some practice to remove when filleting. Many anglers keep a few smaller pike and release the big ones, which are important spawners.
Beginner Pike Mistakes
- Not using a leader. This is the number-one way to lose pike and lures.
- Using lures that are too small. Pike eat big meals. Don’t be afraid of 4- to 7-inch lures.
- Fishing open water away from weeds. Pike are usually near weeds or other cover.
- Lifting the lure out too early. Pike often follow right to the boat or bank.
- Rough handling. Pike need careful handling to survive release.
Frequently Asked Questions
What is the best lure for northern pike?
Spoons, inline spinners, spinnerbaits, jerkbaits and soft plastic swimbaits all catch a lot of pike. A classic red-and-white spoon is hard to beat for beginners because it’s simple to fish and works at any depth.
Do I really need a wire leader for pike?
You need some kind of bite-proof leader. Wire or titanium leaders are the safest, and heavy fluorocarbon (40–80 lb) works well in clear water. Regular line without a leader will often get cut.
What is the best time of year to catch pike?
Spring right after ice-out and fall are usually best, because pike are shallow and feeding heavily. Summer and winter can be good too, but pike are often deeper in summer and more spread out.
What time of day do pike bite best?
Pike are daytime feeders. Early morning and evening are often best in summer, while midday can be very good in spring and fall when the sun warms the shallows.
Can you catch pike from shore?
Yes. Look for shallow, weedy bays, creek mouths and weed edges you can reach from the bank. Spring is especially good for shore fishing, because pike are in shallow water after spawning.
Final Thoughts
Catching northern pike comes down to fishing near weeds, using lures that flash or vibrate, and always using a bite-proof leader. Start with a medium-heavy rod, braided line, a wire or heavy fluorocarbon leader and a few spoons, spinners and jerkbaits, and focus on shallow bays in spring and weed edges in summer and fall.
For more freshwater basics, see our beginners’ guide to freshwater fishing.
