There are few moments in ice fishing as exciting as seeing a tip-up flag snap upright across the ice. Tip-ups let you fish several holes at once with live or dead bait, cover more water than you could with a rod, and catch big fish like northern pike and walleye while you jig nearby.
This guide covers the types of tip-ups, how to rig them, which baits to use, how to set the depth, where to place them, and how to land a fish when the flag goes up.
What Is a Tip-Up?
A tip-up is a simple device that sits over an ice hole and holds a baited line beneath it. When a fish takes the bait and pulls line off the spool, a trip mechanism releases a spring-loaded flag. You walk over, grab the line, and land the fish by hand.
Types of Tip-Ups
- Cross-style (traditional) tip-ups: two crossed arms rest on the ice with the spool underwater. They’re inexpensive and simple, but the hole can freeze over in very cold weather.
- Round or thermal tip-ups: a round base covers the hole, blocking wind and light and slowing ice from forming. They’re a good choice for very cold days.
- Windlass tip-ups: use the wind to jig the bait gently up and down.
How to Rig a Tip-Up
Line
Use tip-up line, a braided Dacron or similar line in the 20 to 40 lb range. It’s easy to handle with cold hands, doesn’t coil like monofilament, and sheds water so it’s less likely to freeze. Fill the spool with plenty of line so a big fish can’t empty it.
Leader
At the end of the tip-up line, tie a small swivel and add a leader 2 to 3 feet long:
- For pike: a wire, titanium or heavy fluorocarbon (20 to 40 lb or more) leader, because pike teeth cut through regular line. See how to catch northern pike.
- For walleye: an 8 to 15 lb fluorocarbon leader, which is less visible.
Weight and Hooks
- Add a split shot or small sinker a foot or so above the hook to hold the bait at depth.
- For pike with larger baits: a quick-strike rig (two small treble hooks on a short wire leader) lets you set the hook right away, so pike are hooked in the mouth and are easier to release.
- For walleye with minnows: a single octopus or circle hook, or a small treble hook, hooked lightly under the dorsal fin or through the lips.
Our fishing knots guide covers the knots for swivels, leaders and hooks.
The Best Tip-Up Baits
- Live suckers and shiners: the classic pike baits, usually 4 to 8 inches.
- Golden shiners and fathead minnows: good for walleye, in smaller sizes.
- Dead bait: smelt, herring and other oily fish work very well for pike, especially at first ice and late ice.
Live bait rules vary a lot between states, including which species you can use and whether you can move bait between waters. Check the regulations before you go.
How to Set the Depth
- Find the bottom. Clip a heavy weight (a depth finder or “clip-on sounder”) to your hook and lower it until the line goes slack.
- Set the bait height. For walleye, about 1 foot off the bottom. For pike, anywhere from a few feet under the ice to just above the weed tops, or a few feet off the bottom over deeper water.
- Adjust the trip setting so the flag releases with a light pull. Many tip-ups let you set how easily the flag trips, which helps avoid false flags from active bait or wind.
Where to Set Tip-Ups
Spread tip-ups out to cover different depths and features, and set them in a pattern you can watch easily:
- Weed edges and weed beds: prime pike water, especially early in the season.
- Drop-offs and breaklines: where shallow flats meet deeper water.
- Points and inside turns: natural travel routes for pike and walleye.
- Shallow bays at late ice: pike move shallow before spawning.
A common approach is to set tip-ups in a line from shallow to deep across a drop-off, then move tip-ups that don’t produce. Jig for panfish or walleye in the middle of your spread so you can see the flags. Our guide on how to locate fish in winter explains where fish hold under the ice.
Check the Rules
Before setting tip-ups, check your state’s regulations on:
- how many lines you can fish at once
- whether tip-ups must be marked with your name or contact details
- how far you can be from your tip-ups and how often they must be attended
- live bait use and transport
What to Do When the Flag Goes Up
- Walk over calmly. Running on ice is dangerous, and heavy footsteps can spook the fish.
- Watch the spool. If it’s turning, the fish is running with the bait.
- With quick-strike rigs: set the hook as soon as the line comes tight.
- With single hooks: let the fish run, then wait for it to stop and start moving again before setting the hook. Many anglers set the hook on the second run.
- Set the hook by pulling the line firmly upward with a sweeping motion until you feel the weight of the fish.
- Fight the fish hand over hand. Let line slip through your fingers if the fish surges, and pull it back steadily when it stops. Keep loose line on the ice off to the side so it doesn’t tangle or freeze.
- Guide the head into the hole and lift the fish out. A pair of fishing gloves and long pliers help with pike.
If you’re releasing the fish, unhook it quickly and get it back in the water. Pike in particular should be handled carefully. See our pike guide for safe handling.
Tips for Better Tip-Up Fishing
- Check baits regularly. Replace dead or lifeless live bait.
- Keep holes open. Skim ice regularly, or use thermal tip-ups in very cold weather.
- Watch for false flags. Wind or very lively bait can trip flags. Adjust the trip setting.
- Fish the low-light periods. Walleye bite best at dawn and dusk, and pike are often active through the day.
- Use a light at night. Some tip-ups have flag lights so you can see them after dark.
- Move unproductive tip-ups. If a spot hasn’t produced in an hour or two, try a new depth or feature.
Frequently Asked Questions
What is the best bait for tip-ups?
Live suckers and shiners are the classic pike baits, and fathead minnows and small shiners work well for walleye. Dead smelt or herring are also excellent for pike. Check local rules on live bait.
How deep should I set a tip-up for pike?
It varies. Pike often hold near weeds, so set the bait a few feet under the ice or just above the weed tops in shallow water, or a few feet off the bottom over deeper water.
How deep should I set a tip-up for walleye?
Set the bait about a foot off the bottom, since walleye usually feed near the bottom in winter.
How long should I wait to set the hook on a tip-up?
With a quick-strike rig, set the hook right away. With a single hook, let the fish run, wait for it to stop and start moving again, then set the hook.
What line should I use on a tip-up?
Use braided tip-up line in the 20 to 40 lb range, with a wire or heavy fluorocarbon leader for pike, or a lighter fluorocarbon leader for walleye.
Final Thoughts
Tip-ups are a simple, fun way to target pike and walleye through the ice while you jig nearby. Rig them with braided line and the right leader, set baits at the right depth along weed edges and drop-offs, follow your state’s rules, and stay calm when the flag goes up.
For more ice fishing guides, see ice fishing for beginners, how to ice fish for perch and walleye and the Ice Fishing hub.
